Category Archives: Presto ECOA - Page 8

Presto Lifts P4 Load Leveler

Posted by on January 6, 2012 Comments Off on Presto Lifts P4 Load Leveler

PALLET LOAD LEVELER

A new hydraulic load leveler for use in the manual loading and unloading of pallets has been introduced by Presto Lifts Inc.

The P4™ improves worker productivity and reduces fatigue. Its platform lowers to floor height so that pallets can be placed and removed using a hand pallet truck.

In loading operations, a pallet is placed on the platform and the platform is raised by hydraulic power to its full “UP” position. As goods are loaded onto the pallet, the platform is lowered so that each succeeding tier of goods can be loaded at the same height.

When unloading pallets, the platform starts at its lowest height and is progressively raised so that each succeeding tier of goods can be removed at the same height.

When unloading pallets, the platform starts at its lowest height and is progressively raised so that each succeeding tier of goods can be removed at the same height.

The P4 can be accessed from all four sides. Units are equipped with a photoelectric toe guard which will stop downward travel if the beam is interrupted.
The units have capacities up to 4000 lbs., making them suitable for most pallet loads that can be moved with hand equipment.

Presto Scissor Lifts

Posted by on December 6, 2011 Comments Off on Presto Scissor Lifts

 SCISSOR LIFT TABLES FOR A VARIETY OF USES

 

Presto Lifts Inc. offers a complete line of scissor lift tables for a wide variety of uses. Standard Duty lifts are available with capacities from 2000-6000 lbs. with platform sizes up to 48”x88” and satisfy most application requirements.

 

Special requirements can be accommodated by special use units. Light Duty lifts are available in 1000 & 1500 lb. capacities in both electric and manual lift styles. Portable lifts feature DC Power, can be easily moved from location to location and can be equipped with single or double high lift mechanisms. Many units are also available with pneumatic actuation.

Presto Skid Lifter

Posted by on December 1, 2011 Comments Off on Presto Skid Lifter

SKID LIFTER IS A TRANSPORTER/WORK POSITIONER

Presto Lifts, Inc. announces the availability of a new skid lifter. Designed to pick up a load on a skid or open-bottom pallet, the Presto Skid Lifter can transport the load to a workplace and then raise it to a convenient working height. It is ideal for feeding presses, binders, cutters, conveyors and a wide variety of production machines.

The unit has a 3000-lb. capacity and a raised height of up to 32”. Lift is achieved by a two-speed manual pump. For loads under 600 lbs., the unit automatically goes into “Quick Lift” mode so the forks can be raised the full 32” in just 18 strokes of the ergonomically designed steer handle. For heavier loads the unit shifts to “Ergo Lift” mode, raising the forks to full height in 55 strokes. Automatic load stabilizers prevent the unit from being moved when the load is raised. Standard forks are 45” long with an outside dimension of 27” or 20.5”.

Rol-Lift Pallet Trucks

Posted by on November 2, 2011 Comments Off on Rol-Lift Pallet Trucks

HAND PALLET TRUCKS AVAILABLE IN OVER 50 CONFIGURATIONS

Rol-Lift® Hand Pallet Trucks from Presto Lifts Inc. are available in a variety of sizes, configurations, and capacities for virtually any use. Economy models designed for occasional use have 4,500 lb. capacity and 48″ forks. For more frequent use, Standard and Heavy Duty models have 5,000 lb. and 5,500 lb. capacities and are available in 20.5″ or 27″ wide configurations with fork lengths as short as 32″ and as long as 72″. Super Duty Trucks have a 6,500 lb. capacity and are also available in a wide range of fork lengths and widths.
Presto Lifts also manufactures a full line of specialty hand pallet trucks for special use applications including Low Profile, Four Way, Zinc Coated for hostile environments, and Stainless Steel for sanitary applications.
All Rol-Lift Hand Pallet Trucks are designed to provide years of service with little or no maintenance. Each has a tight turning radius to get in and out of confined spaces in warehouses and trailers. They also come equipped with specially designed fork tips that glide easily over pallet bottom boards. Most models are in stock and available for quick delivery.

Presto Lifts P3 Load Leveler

Posted by on October 24, 2011 Comments Off on Presto Lifts P3 Load Leveler

PNEUMATIC LOAD LEVELER AUTOMATICALLY ADJUSTS PALLET HEIGHT AS BOXES ARE ADDED OR REMOVED

The P3™ Pneumatic Leveler from Presto Lifts Inc. allows operators to build or break down pallet loads with a minimum of bending, reaching, stretching, or walking around. The unit automatically adjusts the height of pallets as boxes are added or removed. Height adjustment is achieved by a heavy-duty reinforced rubber airbag combined with a permanent spring.

Because the P3 is pneumatic it can handle a widely varying pallet load weights (from 400-4,500 pounds). It can be used anywhere that shop air is available.

A large turntable equipped with anti-friction bearings allows loads to be quickly and effortlessly rotated so that operators can always be working on the nearside of the pallet.

The extra-wide base means no lagging is necessary, and fork pockets allow the unit to be easily relocated by a fork truck or stacker.

Presto Lifts Lift Stik

Posted by on October 21, 2011 Comments Off on Presto Lifts Lift Stik

For all you New England and Upstate NY dealers we have a model 220 Lift Stik available to demo right out of the Attleboro, MA home office. Contact the Presto office directly or see the Contact Us page on this site.

SLEEK, STYLISH, ERGONOMIC WORK POSITIONERS

The Lift Stik™ from Presto Lifts may be the most versatile lifter transporter ever built. Its innovative compact design distributes the load evenly over four oversized casters that roll easily over thresholds and uneven floors.

Lift is achieved by a powered, continuous chain in the Lift Stik’s™ single mast. The narrow mast design provides unmatched visibility. A hand-held push-button remote allows the operator to lift or lower the platform from any side of the unit and at dual speeds for safe, efficient control. Because the lift is mechanical and not hydraulic, there is zero drift and no possibility of messy hydraulic leaks. The battery-charge indicator is mounted centrally on the push handle in direct view, and an auto-cutoff function prevents overcharging.

Ideal for stockrooms, assembly areas, laboratories, offices, and retail stores, Lift Stiks™ are available in four models with load capacities ranging from 185 to 445 lbs. Maximum lift heights of the platform/forks range from 52” to 65”. The unit’s ergonomic contoured “sponge grip” handles can be adjusted to accommodate operators of different heights.

 

Units are available with either platform or fork design.

 

Presto Lifts Power Stak

Posted by on October 20, 2011 Comments Off on Presto Lifts Power Stak

SLEEK, STYLISH, ERGONOMIC WORK POSITIONERS

 

Long known as the leader in manual stackers, Presto Lifts Inc. introduces the availability of a new line of fully powered stackers. With lift heights of 62”, 101”, 125” and a full 2,200 lbs. capacity, the new Power Stak™ line is loaded with ergonomic features. Narrow mast design and offset control handle, provide operators with a clear view of what’s in front of them with virtually no blind spots. An ergonomically designed handle puts all controls within easy read for maximum operator comfort and convenience. Forward and reverse drive “thumb” switches are located on both sides of the handle to accommodate left or right hand operation. An auto reversing belly switch protects operators from potential injury when walking the unit backwards while an automatic brake immediately halts travel when reversed.

The Power Stacker is built on an extremely stable, yet short wheel base to provide maximum maneuverability even in tight quarters. Power is achieved via two 12-volt maintenance free batteries. A 110-volt built-in charge is also a standard feature. Units are available in fork-over design for use with open bottom pallets, or adjustable straddle design for use with closed bottom pallets.

Presto Counterweight Stacker

Posted by on October 19, 2011 Comments Off on Presto Counterweight Stacker

 

POWERED STACKER IDEAL FOR TIGHT SPACES

The versatile, fully powered PowerStak™ Counterbalance Stacker from Presto Lifts Inc. works with any style pallet or skid and is ideal for servicing racks, loading/unloading trucks, feeding machinery, and other applications where straddle legs could get in the way. With a load capacity of 1100 pounds, a load center of 15”, and a lift height of 62”, the unit has a short yet stable wheel base to maximize maneuverability in tight quarters on uneven floors and ramps. The tilt of the mast is adjustable. Overall height is 82”, overall width 32”. The forks are each 3” wide and 30” long. The PowerStak Counterbalance Stacker is loaded with ergonomic features. The ergonomically designed handle puts all controls within easy reach for maximum operator comfort and convenience. Forward- and reverse-drive “thumb” switches are located on both sides of the handle to accommodate left-hand or right-hand operation. An auto-reversing “belly bump” switch protects operators from potential injury when walking the unit backwards, while an automatic brake immediately halts travel when the stacker is reversed. The polyurethane drive wheel is fully shrouded to protect the operator’s feet. Power is achieved via two maintenance-free 12-volt batteries. A 110-volt built-in charge is also a standard feature. Options include load backrests, a deep-cycle battery, and forged forks.