Tag Archives: Prime Alliance Marketing - Page 19

Visit Presto Lifts at Pro-Mat 2013, Jan 21-24, 2013

Visit Presto Lifts in booth 1831 at Pro-Mat 2013, McCormick Place, Chicago. Always the premier material handling show in the country, Pro-Mat provides an excellent opportunity to connect with and see the best of material handling all under one roof. Prime Alliance Marketing along with Presto Lifts look forward to seeing all of our New England Material Handling Dealers at the show.

Cogan Safety Pivot Gates, The Best In The Industry!

Here are 3 reasons why Cogan’s Pivot Gates are the best in the industry.

1. Specifically engineered 4-point design transfers vertical movement horizontally.

2. The middle section is independent from the main gate pivot component, allowing you the flexibility of depth increase/decrease without the need of buying a new gate.

3. No matter the size, our safety pivot gates maintain a constant height of 83.5″ while in use. Unlike single-hinge models, which extend vertically as the gate size increases, Cogan Safety Pivot gates work easily in confined spaces. Your gate will never bump against a low-ceiling or the upper deck of a multi-level mezzanine.

Prime Alliance Marketing is proud to represent Cogan Wire & Metal in the New England territory. Cogan continues to bring new and exciting products to the marketplace. Please don’t hesitate to contact us, we’re always here to help.

Cogan is Now Offering 4 Mezzanine Engineering Packages

Every mezzanine project encounters different conditions and requirements, that’s why Cogan offers various engineering solutions to meet your specific needs. As our standard, each Cogan mezzanine comes with a basic plans package that will support you up to a certain stage during the different phases of your project.

Depending on the complexity of your project and requirements, Cogan recommends that most clients and/or end users work in association with an architect for additional support. This is to ensure that any critical aspects such as building classification and occupancy, electricity, plumbing, fire codes, exit signage etc. will be properly analyzed and addressed. Please keep in mind that Cogan is not responsible for certifying or analyzing the concrete slab capacity and integrity where the mezzanine columns are to be installed.

 

Rol-Lift® Stainless Steel Hand Pallet Truck by Presto Lifts, Inc

 For the ultimate protection from corrosive environments and sanitary washdown, choose a Rol-Lift® Stainless Steel Hand Pallet Truck, by Presto Lifts, Inc.  These units are ideal for use in freezers, food processing, pharmaceutical and laboratory environments.

They are available in six standard configurations to handle a wide range of pallet shapes and sizes.

Presto Rol-Lift® Pallet Trucks

HAND PALLET TRUCKS AVAILABLE IN OVER 50 CONFIGURATIONS

Rol-Lift® Hand Pallet Trucks from Presto Lifts Inc. are available in a variety of sizes, configurations, and capacities for virtually any use. Economy models designed for occasional use have 4,500 lb. capacity and 48″ forks. For more frequent use, Standard and Heavy Duty models have 5,000 lb. and 5,500 lb. capacities and are available in 20.5″ or 27″ wide configurations with fork lengths as short as 32″ and as long as 72″. Super Duty Trucks have a 6,500 lb. capacity and are also available in a wide range of fork lengths and widths.
Presto Lifts also manufactures a full line of specialty hand pallet trucks for special use applications including Low Profile, Four Way, Zinc Coated for hostile environments, and Stainless Steel for sanitary applications.
All Rol-Lift Hand Pallet Trucks are designed to provide years of service with little or no maintenance. Each has a tight turning radius to get in and out of confined spaces in warehouses and trailers. They also come equipped with specially designed fork tips that glide easily over pallet bottom boards. Most models are in stock and available for quick delivery.

Cogan Econo-Fence Hanging Lockers

 This system offers a fully-suspended unit featuring a spacious 6′, 7′ or 8’W x 4’H x 3’D interior. All side floor and transom panels are made of unframed 2″ x 2″ x 6 and 8 GA electro-galvanized welded wire mesh. This innovative design allows for any necessary trimming around water pipes, wall irregularities and other obstructions to be done on-site, eliminating costly installation charges. Slide frames are made of 1 1/2″ x 1 1/2″ x 16GA square tubing and come pre-welded with adjustable ceiling plates for easy adaptability on uneven surfaces. All upper and lower tracks, as well as doors are sealed with a silver powder coated paint finish. All hanging locker systems are equipped with 2 sliding doors. Padlock hasps and door stoppers come standard with all systems. Cogan’s expertise in condo lockers contributes greatly to the success of the easy to order, easy to install storage solution for Condo garages, or and parking garage applications. See the full line of Cogan Condo Lockers here.

Presto Gives Palletizing Another Lift

 P4 Floor-Level Loader

Use hand pallet trucks? You need this.

  • Handles up to 4000 lbs
  • Lowers to floor level
  • Load and unload with a pallet truck
  • Easily adjusts to pallet height for convenient loading and unloading
  • Portable- just raise the platform 5″ and lift up on the underside
  • Helps keep workers safe

Presto Gives Palletizing a Lift

P3 Self-Leveling Pallet Positioner

I does more work, to make you more efficient!

Stop bending, stooping and twisting — reduce injury and increase productivity with the Presto P3 Pallet Positioner!

  • Does not require a dedicated air line
  • Automatically raises and lowers as boxes are added and removed
  • Turntable top with full 360 degree rotation
  • Anti-friction bearings for easy turning
  • Can handle loads up to 4500 lbs

Metalware Interlok No Bolt Shelving

Metalware Shelving

Why Metalware? Metalware has been making steel shelving for well over 50 years. It’s the only thing we make, enough said. Making only the one product allows us to focus on making some of the strongest and most ecinomical shelving on the market today.

  • Metalware uses one style of post, the T-Post. No angles to assemble, no worrying about getting it wrong during the install.
  • We’ve recently added a box beam shelf. Hey, better late than never, right? Less steel, less money, with more capacity. Can’t argue with that!
  • Installers love putting up Metalware. The compression fit of the shelf and clip allow for quick and accurate installations.
  • Open style or closed style of shelving are available. Our end pannel assemblies are welded, not bolted, saving valuable assembly time. 

Metalware Steel Shelving is ideal for Archival Storage of boxes or X-rays, High Rise picking applications, Tool rooms, and of course, general storage.

Presto Tandem Scissor Lifts

Presto Tandem Scissor Lift

Presto Lifts adds a line of Tandem Scissor Lifts to it’s ever expanding arsenal of products. Tandem lift tables provide level rise for long loads such as lumber, pipes, sheets, bar stock, and assemblies. Tandem lift tables are typically used as feeder tables for tube welders, formers, and panel saws as well as for bundling and banding bar stock, lumber and other materials.

Features of the Presto Tandem Scissor Lift Tables are:

  • Upper travel limit switch and Lifting eyes included on all Tandem Scissor Lifts
  • Application information must be reviewed for all Tandem lifts. Approval drawings will be provided